英文互译镜像站

Uncorrelated noise

Last updated

The term uncorrelated noise refers to a noise source being uncorrelated to a signal or another noise source. [1] White noise in particular, due to its randomness, is uncorrelated to any other signal and is also serially uncorrelated (i.e., later values of it have no correlation to earlier values). Thus, "uncorrelated noise" is sometimes imprecisely[ citation needed ] used synonymously with "white noise". However, in general, noise sources can have any noise spectrum and may or may not be correlated with each other (in practice different noise sources are usually uncorrelated [2] ). This situation is sometimes described as "uncorrelated colored noise". [3]

Uncorrelated noise in electronics

Electronic circuits may have many types of electronic noise.

If the noise sources are uncorrelated with each other, those noise sources add according to the sum of their power. [2] Thus, when expressed as voltages or currents (), the square of the total noise () is the sum of squares of the individual noise sources (). In other words, the total noise voltage or current () is the square root of that sum of squares:

References

  1. Kay, A. (2012). Operational Amplifier Noise: Techniques and Tips for Analyzing and Reducing Noise. Elsevier Science. p. 217. ISBN   978-0-08-094243-8 . Retrieved 2024-04-08.
  2. 1 2 Sobering, Tim J. (1999). "Noise in Electronic Systems" (PDF). Archived (PDF) from the original on 2023-05-20. Retrieved 2024-04-07.
  3. Luo, Jun; Liu, Gang; Huang, Zongming; Law, S.S. (2019). "Mode shape identification based on Gabor transform and singular value decomposition under uncorrelated colored noise excitation". Mechanical Systems and Signal Processing. 128: 446–462. Bibcode:2019MSSP..128..446L. doi:10.1016/j.ymssp.2019.04.002.


霸屏SEO镜像站群 烟雨镜像程序 镜像程序 泛域名镜像 镜像站群系统