英文互译镜像站

El Paso & Southwestern Railroad No. 1

Last updated
El Paso & Southwestern Railroad 1
El Paso and Southwestern locomotive number 1.jpg
El Paso & Southwestern Railroad No. 1
Type and origin
Power typeSteam
Builder Breese, Kneeland, and Company
Serial number73
Build dateMay 1857
Specifications
Configuration:
   Whyte 4-4-0
Gauge 4 ft 8+12 in (1,435 mm)
Driver dia.64 in (1.626 m)
Adhesive weight 67,170 lb (30.47 tonnes)
Loco weight104,170 lb (47.25 tonnes)
Fuel type
Boiler pressure110 psi (0.76 MPa)
Cylinders Two, outside
Cylinder size 15 in × 22 in (381 mm × 559 mm)
Valve gear Stephenson
Performance figures
Tractive effort 7,260  lbf (32.3  kN)
Career
Operators
Numbers
  • M&M/M&PdC 40
  • M&StP/CM&StP 111
  • A&SE/EP&SW 1
Retired1903
Restored2002 (cosmetically)
Current owner University of Texas at El Paso
DispositionOn static display

El Paso & Southwestern Railroad 1 is a 4-4-0 "American" type steam locomotive, preserved in El Paso, Texas. The engine was built in 1857 by Breese, Kneeland, and Company of Jersey City, New Jersey, and is the only locomotive built by that firm still in existence.

Contents

History

Revenue service

It was a wood burner built for the Milwaukee & Mississippi Railroad Company in 1857 as their No. 40 and named Spring Green. [1] :67 The Milwaukee & Mississippi became the Milwaukee & Prairie du Chien Railway Company in 1861. The locomotive was renumbered 111 when the M&PdC was sold to the Milwaukee & St Paul Railroad in 1867; the railroad renaming itself The Chicago, Milwaukee & St. Paul Railroad in 1874. [2] :25

In 1889, the locomotive was sold to the Arizona and Southeastern Railroad Company, as their No. 1, later becoming the El Paso and Southwestern Railroad. It is likely to have been converted to coal burning during this time, thus receiving its current appearance with a straight stack and extended smokebox. EP&SW No. 1 was used to move mine and mill supplies and products when it arrived here in 1902. As El Paso became one of the great rail hubs of the west, timber was brought from Cloudcroft and coal from Dawson, New Mexico.

Preservation

In 1903, it was retired, and around 1909, Locomotive No. 1 was overhauled, painted, and put on display in Downtown El Paso at the intersection of Stanton and Franklin streets. In 1939, the engine was used in the film Let Freedom Ring, starring Nelson Eddy and Virginia Bruce.

In 1960, Southern Pacific Railroad donated it to the University of Texas at El Paso who displayed it near the Centennial Museum and Chihuahuan Desert Gardens. The bell clapper was removed because students would ring it to disturb the slumber of residents in nearby dorms. In 1968, El Paso Historical Society and the Junior Chamber of Commerce raised money to build a shelter to protect this important national treasure from the elements.

In El Paso Railroad and Transportation Museum, El Paso (28319850304).jpg
In El Paso

In October 1999, the engine was officially recognized as a National Trust for Historic Preservation Save America’s Treasures project. In 2001 more than $1.1 million of Texas State Transportation Commission and local matching funds were allocated for the removal and restoration of the locomotive. The engine was removed from the Centennial Museum in 2002, and placed in a warehouse where it was cosmetically restored. As part of the restoration work, the bell clapper was returned on June 20, 2002, and reinstalled. The restored engine was placed in the Railroad and Transportation Museum of El Paso in 2003.

See also

References

  1. Edson, William D. (Spring 1977). "Milwaukee Road Locomotives". Railroad History . 136 (136). Railway and Locomotive Historical Society: 28–129. JSTOR   43523968.
  2. Edson, William D. (Spring 1977). "Predecessor Lines of the Milwaukee Road". Railroad History . 136 (136). Railway and Locomotive Historical Society: 22–27. JSTOR   43523967.
递归网站下载 一键镜像站群 干扰字符镜像 自动镜像站群 递归网站下载